On 26/09/2019 21:33, Keith Harris wrote:

Now I'm slightly confused...

Just noticed the Temperature & Humidity had again started displaying --.- & --% and this time in the bottom RH corner of the console it was displaying a 'L'.

Note: the other day the battery on my 2nd temperature sensor died and the display was reading 'Battery Low...' along the bottom line of the console, I guess it can't also read 'L'. as well possibly?

So I have just replaced the battery in the ISS come back in and everything now displaying correctly, the bottom RH is displaying the usual 'X' slowly on and off.

Yet, just checked the charge on the battery I have taken out and it is charged. I know this because I then checked with the battery I took out of the 2nd temerpature sensor yesterday and it registered nothing. Maybe, the battery I took out of the ISS was not quite housed in properly, or there was some dirt between the contact, although it looked clean.

A mystery.

Keith (Southend)



L means signal 'L'ost. I had this intermittently with my setup a year
or so ago. The solution for me was to reboot the console (it had been
running non-stop for years since it is mains powered with battery backup).


--
Brian Wakem